Bundle 3 // 3 DOF // 800x800x500 mm working space // 0.25 kg combined payload

Linear robots have several linear axes combined in order to implement a multidimensional movement. igus supplies flat, linear and room linear robots for a multitude of different tasks. igus linear robots include harnessed drylin linear modules/axes with NEMA stepper motors as well as all the components needed to build your own robot. Application examples for room linear robots: Measurement and testing, handling and assembly technology, identification in microelectronics and medical technology, tasks in the handling of small parts and simple handling tasks.
  • research & development
  • education
  • computer vision applications
  • pick and place applications
Price

plus VAT and shipping

On request

Components

Room Linear Robot - Stepper Motors with Encoder, Working Space 800x800x500 mm

Room Linear Robot - Stepper Motors with Encoder, Working Space 800x800x500 mm

by igus® GmbH
Linear robots have several linear axes combined in order to implement a multidimensional movement. igus supplies flat, linear and room linear robots for a multitude of different tasks. igus linear robots include harnessed drylin linear modules/axes with NEMA stepper motors as well as all the components needed to build your own robot. Application examples for room linear robots: Measurement and testing, handling and assembly technology, identification in microelectronics and medical technology, tasks in the handling of small parts and simple handling tasks.
MPC 040 Parallel Gripper - Pneumatic

MPC 040 Parallel Gripper - Pneumatic

by SCHUNK GmbH & Co. KG
Easily built up 2-finger parallel gripper with good price-performance ratio. Gripping of small to mid-sized workpieces in low-contamination environments with reduced requirements in terms of precision and lifespan and for shorter system run times.
Modular DIN-Rail Robot Controller

Modular DIN-Rail Robot Controller

by Commonplace Robotics GmbH

This modular robot control allows to operate stepper motors and digital Input / Outputs. In combination with the CPRog software gantry or robot kinematics can be driven. Due to the DIN rail form factor the modules allow a very easy service.

The control and programming environment CPRog for Windows 7/10 generates the commands for the joints and forwards them with a USB-to-CAN adapter to the electronic modules. CPRog is based on a 3D user interface that allows an easy start into robot programming. The robot can be moved in reality, but also in simulation to allow testing. Robot programs can contain e.g. Joint, Linear, DigitalOut, Loop or If-Then-Else commands. Further components, e.g. computer vision systems, can be connected using plugins. A 24V power supply and a Windows PC are required for operation.

  • Smooth motion with 1/256 microstepping
  • DIN-rail modules with bus connection
  • Source code and ROS packages are provided
Solenoid Valve for Vacuum - 8 mm, 24 Volt, 5/2-Way Valve

Solenoid Valve for Vacuum - 8 mm, 24 Volt, 5/2-Way Valve

by J. Schmalz GmbH
Solenoid valve for control at high nominal flow rates. It supports control of vacuum, blow off and venting of the suction cup. NO function ensures the workpiece is held even in the case of a power failure. Optimal for handling tasks with very short switching times. The vacuum valve is suitable for neutral or filtered gases.

Keyfacts

Working Space
800x800x500 mm
DOF
3
Max Combined Payload
0.25 kg
Stroke per jaw
4 mm
End Effector Propulsion Method
Pneumatic
Vent Nominal size
8 mm

Related Videos

How does a room linear robot kinematic work?

igus linear robots

Price

plus VAT and shipping

On request