Item no.: mk-guf-p-2000-mss

The GUF-P 2000 is a belt conveyor with a modular profile design for conveying light and medium-weight goods. It is particularly suitable for transporting packaged and unpackaged piece goods, without any specific requirements regarding the product’s position, orientation or geometry.

The T-slots running along both sides (10 mm slot width) in the conveyor frame allow you to easily integrate the conveyors into existing machine frames or to attach conveyor stands, side rails, sensors and other accessories.

The optional motor protection switch (MPS) acts as an interface for start/stop. It is installed in a separate IP54 PVC housing and is wired ready for connection with plug connections.


plus VAT and shipping

On request


Technical data

  • Widths: 200 / 300 / 400

  • Lengths: 1000 / 1500 / 2000

  • Conveyor belt: PU, white FDA, allows for restricted accumulated operation

  • Drive: AC head drive, 90 W / SEW / AC 230 V / 50 Hz / IP 54

  • Motor installation position: 0° horizontally under the belt, either on the left or right (default: left)

  • Speed: 15 m/min.

  • Total load: < 20 kg

  • Type of transport: forwards only, continuous operation

  • Power supply: optional motor overload switch, with external DC 24 V interface for starting/stopping

  • Driving roll: Ø 53 mm, w/o rubber coating

  • Tail: Ø 53 mm

  • Power transmission: chain drive

Motor Protection Switch

The motor protection switch is used for power supply of the motor and meets, with motor protection and a main switch, the requirements of the EC Machinery Directive (MRL) for a complete machine. In addition, a 24V DC interface is available for start/stop control. It is installed in a separate IP54 PVC housing and is wired ready for connection with plug connections. The supply voltage is 400V AC / 50 Hz / 16A.

Other options and accessories

  • Lengths: 500 to 5000 mm

  • Widths: 50 to 800 mm

  • Total load: up to 30 kg

  • Motor installation position: pointing downwards 90°

  • Belt types: from suitable to unsuitable for accumulated operation

  • Side rails

  • Stand systems

  • Angle fastening for table-top assembly or connection to machine frames


Motor Protection Switch
200 mm
1,000 mm