The VarioShaker 270 can separate small parts with a size of 0.5 to 50 mm, depending on your component geometry, by moving, collecting and shaking. The shaker adapts to the different geometries of the small parts by means of different vibrating plates with different surfaces. Currently vibrating plates with surfaces such as knobs, holes and slots are in use, and there are also plates with a smaller separating surface. The vibrating plates can be quickly replaced with just a few hand movements. The Variobotic GmbH checks the compatibility of the small parts in advance by means of part tests. During the test it is decided which vibrating plate fits best to the parts. If necessary, a new surface must be developed.
The VarioShaker can also be put into operation without expert knowledge. The shaker can be set up, configured and operated using the "Shakerconfig" software. The developer Variobotic offers support with a self-made tutorial, in which the individual steps for the installation are clearly explained. Due to its low purchase price, Variobotic also has a short payback period and is therefore particularly suitable for small and medium-sized businesses.