Small Conveyor GUF-P MINI for small and lightweight parts

ตัวแปร: L1000xW100 mm, w/o MPS

หมายเลขชิ้นส่วน: RBTX-MK-0022

The GUF-P MINI is a belt conveyor with a modular profile design for transporting small and lightweight parts with low volumes. Thanks to its minimal installation height, this conveyor is ideal for integrating into complex systems where space is at a premium. Since the belt recirculation is integrated in the conveyor frame, the conveyor can be placed directly on the machine bed. The small diameter of the drive roller and idler roller also prevents large gaps where the products are transferred over.

The T-slots running along both sides (7 mm slot width) in the conveyor frame allow you to easily fasten the conveyors to machine frames or to attach side rails, sensors and other accessories. They also allow for the installation of a conveyor stand along the entire length of the conveyor frame to bypass projecting edges in machine beds, uneven floors and ledges.

The optional motor protection switch (MPS) acts as an interface for start/stop. It is installed in a separate IP54 PVC housing and is wired ready for connection with plug connections.

A base frame is not included in the scope of delivery. Please contact us if required!

The product can be customized to your needs. Please contact us.

Usual delivery time: 3 weeks

฿46,650

ไม่รวม ภาษีมูลค่าเพิ่ม ค่าจัดส่งคำนวณจากใบเสนอราคา

Motor Protection Switch
No
Width
100
mm
Length
1,000
mm

Highlights

kleinfoerderer guf-p-mini bandkoerperprofile

Technical data

  • Widths: 100 / 150

  • Lengths: 1000 / 1500 / 2000

  • Conveyor belt: PU, white FDA, allows for restricted accumulated operation

  • Drive: AD head drive, 90 W / SEW / AC 230 V / 50 Hz / IP 54

  • Motor installation position: 0° horizontally under the belt, either on the left or right (default: left)

  • Speed: 6 m/min.

  • Total load: < 10 kg

  • Type of transport: Recommended forward, continuous operation

  • Power supply: optional motor overload switch, with external DC 24 V interface for starting/stopping

  • Driving roll: Ø 32 mm, w/o rubber coating

  • Tail: Ø 22 mm

  • Power transmission: chain drive

motorschutzschalter

Motor Protection Switch

The motor protection switch is used for power supply of the motor and meets, with motor protection and a main switch, the requirements of the EC Machinery Directive (MRL) for a complete machine. In addition, a 24V DC interface is available for start/stop control. It is installed in a separate IP54 PVC housing and is wired ready for connection with plug connections. The supply voltage is 400V AC / 50 Hz / 16A.

varianten

Other options and accessories

  • Lengths: 400 to 3000 mm

  • Width: 75 mm

  • Total load: up to 15 kg (with width of 150 mm)

  • Speed: up to 15 m/min

  • Motor installation position: pointing downwards 90°

  • Belt types: from suitable to unsuitable for accumulated operation

  • Side rails

  • Stand systems

  • Angle fastening for table-top assembly or connection to machine frames

วิธีแก้ปัญหาโดยใช้ผลิตภัณฑ์นี้

นัดหมายวิดีโอคอลฟรีกับผู้เชี่ยวชาญของเรา

rbtx-expert
เลือกช่วงเวลาที่คุณต้องการ
rbtx-expert
แสดงการใช้งานของคุณ
rbtx-expert
ผู้เชี่ยวชาญค้นหาส่วนประกอบทั้งหมดกับคุณ
rbtx-expert
คุณได้รับข้อเสนอราคาคงที่