3-Axis Delta | Large

Parça No.: RBTX-IGUS-0047

Based on a modular system, users can choose between a compact self-assembly modular kit or pre-assembled in a transport frame. Now new with calibrating pin for easy positioning at the zero point. It is directly fixed to the mounting hub and simplifies the initial calibration process. The cable clip for the delta robot was developed for the secure guidance of lines, e.g. individual pneumatic hoses, along the coupling joint. Easy to fit, lightweight.

Usual delivery time: 3 weeks

€17.220,19

KDVhariç, teklif üzerinden hesaplanan nakliye ücreti

Working Space Diameter
660
mm
DOF
3
Max Payload
5
kg
Max Speed
1
ms
Max Acceleration
20
m
Repeatability
0,5
mm

Önemli başlıklar

igus-robot-control-48v-low-cost-irc

Includes igus® Robot Control

Modular control and Software

This set enables you to control the robolink® robot arm. With the corresponding software, you can programme and move the robot via a graphical user interface.   Main features:

  • Modular, control system based on top-hat (DIN) rail, easy to extend

  • Smooth motion with 1/256 microstepping

  • Energy saving operation with adaptive current control: Trinamics StallGuard2 and CoolStep Technologies

  • Intuitive control and programming environment with interactive 3D user interface

  • Programming commands like Joint, Linear, If-Then-Else, DigitalOut, Loop etc.

  • Interface to remote computer via TCP/IP

  • ROS packages are available

  • Control cabinet

LCA-Teaser-irc-news

Free Download

Download the software and test if on your computer

Download the software now for free. This allows you to familiarize yourself with the user interface and functions even before you buy the components. With the Digital Twin you get an overview of the possibilities of your robot. (System requirements: Windows 10 PC, free USB 2.0 port, Ethernet port, 500 MB free storage)

Download now - It's free

delta 3 achs

Typical application areas

The Delta robots from igus® are available as 2-axis or 3-axis variants. They are suitable for pick and place, conveyor belt picking and stacking tasks in three-dimensional space. In conjunction with a gripper or suction cup and a vision system, bin picking tasks can be implemented very quickly.

robosteuer 5m CMYK (1)

Optional handheld with touch screen

Choose the right setup for you.

You can control the robot either from your Windows 10 PC or from the optional handheld with touch screen. On the PC the robot can be programmed via a graphical user interface. With the handheld you can control the robot with a joystick and start programs via the touch screen. In addition, you can also connect a gamepad to your Windows PC for control as an alternative to the handheld. With this handheld, the robot runs autonomously without the computer after programming via the Windows PC.

Bu ürünü kullanarak çözümler

Uzmanlarımız ile ücretsiz görüntülü görüşme yapmak için randevu alın

rbtx-expert
Tercih ettiğiniz zaman dilimini seçin
rbtx-expert
Bize uygulamanızı gösterin
rbtx-expert
Uzmanımız sizinle birlikte tüm bileşenleri bulur
rbtx-expert
Sabit bir fiyat teklifi alırsınız